The default username is admin and the password field is to be left blank.
Follow the basic steps on how to configure a TP-Link router.
Be aware that your router may display a different interface. Here is a step-by-step guide on how you can configure your device. Note: If you do not know your current public IP address you can find it by going to Below you will see interfaces from the 4 most popular manufacturers. If you see your current public IP address, your setup was successful and your DDNS is working correctly. You should now see your current public IP address. When the router is back up, log into your account again and navigate back to the “Dynamic DNS” page. Select “Modify” next to your hostname and set your hostname IP address to 1.1.1.1 and click “Update Hostname.” Once updated, you will want to restart your router. This can be done by logging into your account and clicking “Dynamic DNS” on the left-hand navigation bar. Step 5: Finally, check to see if your hostname can successfully receive an update. You can also check if another device like a camera on your network if it supports No-IP for DDNS.
Otherwise, you will need to run our Dynamic Update Client on a computer at the location. Please Note: If your router does not list No-IP you can try updating your firmware. * Not every devices will ask you for this. Hostname/Domain: The hostname you created for example: Password: Your Password to log into No-IP
Username: Your full No-IP Account Email Address or Username Then enter the hostname or domain you have created in the host or domain field.īelow is an example of what your settings may look like: Step 4: On the DDNS page, select No-IP as the service provider. Typically this will be under Advanced and then DDNS or Dynamic DNS. Step 3: Next, locate the Dynamic DNS (DDNS) settings. If not, you can see the most common credentials below. Please Note: Your router credentials should be on a sticker on the bottom of your router. Step 2: Enter your router credentials into the login page. Step 1: Login to your router via the default gateway address. If you find that yours does not, drop them a Tweet or Email and ask them to add us. Not all router manufacturers include No-IP as an Integrated Dynamic DNS provider. Instead, you use the Integrated Dynamic DNS. Configuring DDNS in your router means that you don’t have to use our Dynamic Update Client to keep your hostname updated with the correct IP address. This guide will help you setup and configure Dynamic DNS within your Router. Here’s a great video that explains how to configure DDNS in a router: